Bosch CM8S Use and Care Manual download pdf (Page 19)



17B@A:2;A@

O2C29&A<=0<;A6;B21

6@0<;;20A =9B4 3?<: =<D2?

@<B?02 /23<?2 =2?3<?:6;4 .;F

@@2:/9F.17B@A:2;A<??2=.6?A<.C<61=<@@6/92

6;7B?F

NOTE: Your miter saw was completely adjusted at the

actory. However, during shipment, slight

misalignment may have occurred. Check the

following settings and adjust if necessary prior to

using this miter saw.

.96/?.A6;49.12.AO2C29

OA<A52A./92

Note: Use a 3/8” (10mm) wrench for adjustment.

Note: Calibrating the bevel setting automatically

calibrates the -2° right stop.

1. Lower head assembly and engage head assembly

lock pin.

2. Slide the head assembly completely to the back

and engage the slide rail lock knob by tightening

the knob to the right (clockwise).

3. Pull the bevel lock lever forward to unlock the head

assembly.

4. Locate the bevel stop bolt below the bevel lock

handle on the right side of the bevel post. This bolt

features a lock nut (see figure 17).

5. Loosen the bevel stop bolt a quarter turn and then

loosen the lock nut. When this is complete you will

be able to adjust the bevel stop bolt by hand.

A. Rotate the bevel stop bolt clockwise to adjust the

head to the right.

B. Rotate the bevel stop bolt counter-clockwise to

adjust the head to the left.

6. Follow the procedure in “Checking 0° Bevel

Setting” to check your modifications. If further

adjustment is required, repeat the steps above.

7. Once satisfactory, lock the bevel lock at 0° to

prevent movement.

8. Finger tighten the lock nut in place. Once secured,

tighten the lock nut with wrench.

17B@A6;42C29&0.92$<6;A2?

Once you have adjusted the blade to the correct

angle, make sure to adjust the Bevel Scale Pointer.

To do so,

1. Loosen the screw which holds the pointer in place

a quarter turn, (see figure 18).

2. Align the pointer with the 0° line and retighten

screw.

*%""

FIG. 17

2C29&0.92

<08"BA

2C29&A<=

<9A

2C29 <08

FIG. 18

&0?2D

2C29&0.92

$<6;A2?

BM 2610025580 05-13_BM CM8S 5/17/13 1:37 PM Page 19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 131 132

Comments to this Manuals

No comments

Bosch CM8S Use and Care Manual Page 19

Comments to this Manuals

Related products and manuals for Mitre saws Bosch CM8S