Bosch MIC SERIES 500 CAMERA 500 User Manual download pdf (Page 14)

14 en | Mounting MIC Series 500 Camera

F.01U.173.601 | 2.0 | 2010.11 User’s Manual Bosch Security Systems, Inc.

4 Mounting

Installation should be made by qualified service personnel and conform to the National

Electrical Code and applicable local codes.

The MIC 500 Series Camera range has been designed for easy installation on a variety of

common fittings. The most common type of mount used is a dedicated CCTV camera pole

where the camera is bolted directly to the top of the pole using industry standard 4 in. (101.6

mm) fittings. This type of camera pole provides a robust mounting platform that minimizes

camera motion and typically has a large base cabinet for mounting ancillary equipment such

as power supplies.

The camera can also be mounted on lamp post columns using the Pole Mount Bracket (MIC-

PMB); however, users should be aware that lamp posts can often be subject to movement and

are not suitable platforms in all conditions or for all applications.

The following mounting brackets are available:

For mounting directly to a building, brackets are available for all typical building installations

such as upright (90°), canted (45°), or inverted.

Figure 4.1 Typical pole mount arrangement (MIC-PMB with MIC-SCA and MIC-WMB)

Figure 4.2 Typical wall mounting arrangement (MIC-SPA, MIC-SCA and MIC-WMB)

Part Description

MIC-SPA Wall Spreader Plate

MIC-PMB Pole Mount Bracket

MIC-CMB Corner Mount Bracket

MIC-WMB Wall Mount Bracket

MIC-SCA Shallow Conduit Adaptor

MIC-DCA Deep Conduit Adaptor

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 55 56

No comments

Bosch MIC SERIES 500 CAMERA 500 User Manual Page 14