Bosch DIP-7082-8HD Installation Manual download pdf (Page 16)

Installing a hard drive

The drives are mounted in drive carriers.

To install a hard drive to the hard drive carrier:

Remove the screws securing the dummy drive to the carrier.

2. Remove the dummy drive from the carrier.

Install a new drive into the carrier with the printed circuit board side facing down so that

the mounting holes align with those in the carrier.

4. Secure the hard drive by tightening all 6 screws.

1 Drive carrier 2 SAS/SATA hard drive

5. Replace the drive carrier into the chassis bay. Make sure that the drive carrier handle is

completely closed.

3.2.2

16 en | Chassis setup and maintenance DIVAR IP 7000 2U

2013.09 | V2 | DOC Installation Manual Bosch Sicherheitssysteme GmbH

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 71 72

No comments

Bosch DIP-7082-8HD Installation Manual Page 16