Bosch DIP-7082-8HD Installation Manual download pdf (Page 19)

1 DVD-RW 2 Front Port Panel

To replace or install the front port panel:

Turn off and unplug the unit.

2. Remove the chassis cover.

3. Disconnect the power and data cables from the front port panel to other chassis

components including the motherboard and backplane.

4. Remove the old port panel by depressing the release tab, then pulling the unit out of the

chassis.

5. Insert the new front port panel unit in the slot until the tab locks into place.

6. Connect the data and power cables to the backplane and motherboard.

Installing the motherboard

Motherboard problems will be handled by trained support people only.

Installing the air shroud

Air shrouds concentrate airflow to maximize fan efficiency. The air shroud does not require

screws to set up.

3.7

3.8

DIVAR IP 7000 2U Chassis setup and maintenance | en 19

Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 71 72

No comments

Bosch DIP-7082-8HD Installation Manual Page 19