Bosch DIP-7082-8HD Installation Manual download pdf (Page 27)

4. Separate the inner rail extension from the outer rail assembly.

Installing the inner rails

The chassis includes a set of inner rails in two sections: inner rails and inner rail extensions.

The inner rails are pre-attached to the chassis, and do not interfere with normal use of the

chassis if you decide not to use a server rack. The inner rail extension is attached to the inner

rail to mount the chassis in the rack.

To install the inner rails:

1. Place the inner rail extensions on the side of the chassis aligning the hooks of the chassis

with the rail extension holes. Make sure the extension faces "outward" just like the pre-

attached inner rail.

2. Slide the extension toward the front of the chassis.

3. Secure the chassis with 2 screws as illustrated.

4. Repeat steps for the other inner rail extension.

Installing the outer rails to the rack

Outer rails attach to the rack and hold the chassis in place. The outer rails extend between 30

inches and 33 inches.

4.3.2

4.3.3

DIVAR IP 7000 2U Rack installation | en 27

Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 71 72

No comments

Bosch DIP-7082-8HD Installation Manual Page 27