Bosch ITS-DX4020-G Specifications download pdf (Page 20)

20 en | Configuration GPRS/GSM IP Communicator

F01U133268 | 03 | 2010.05 Installation and Operation Guide Bosch Security Systems, Inc.

PSTN (Contact ID) over GSM Mode

Table 4.3 PSTN (Contact ID) over GSM Mode SMS Configuration

Multiple SMS Messages (for Messages Longer than 160 Characters)

Table 4.4 Double SMS Example, Part 1

Table 4.5 Double SMS Example, Part 2

4.1.3 Send the Configuration SMS

1. Send the configuration SMS to the SIM card phone number. The transmission might take

several minutes. Because the CONFIG jumper is on, the ITS-DX4020-G waits for an SMS

until a message is received.

2. Observe the LEDs on the ITS-DX4020-G.

When all of the LEDs start a scrolling pattern, the ITS-DX4020-G is successfully

configured. Refer to Table 4.6 for more information.

ID Description Sample SMS

%1 SMS sequence number 1

1= Current password (4 to 15 characters); default = 4020G

14= Control panel bus address 0 to set it to PTSN (Contact ID)

over GSM mode

17= Communication path:

– 1 = Both (default)

– 2 = IP over GPRS

– 3 = PSTN (Contact ID) over GSM

! End of configuration

Select 3 (PSTN (Contact ID) over GSM) for PSTN over GSM Mode

ID Description Sample SMS

%1<LF> SMS sequence number 1

1=4020G<LF> Current password

2=secret123<LF> New password (case sensitive)

3=123456,4343<LF> PUK and new PIN to set in SIM

10=basic.m2m<LF> (Access Point Name) APN

[email protected]<LF> GPRS username

12=password<LF> GPRS password

15=1<LF> Enable AES encryption

16=01020304050607080910

111213141516<LF>

Sample AES key

ID Description Sample SMS

%2<LF> SMS sequence number

14=134<LF> Option bus address

! End of configuration

1=4020G

14=0

17=3

1=4020G

2=secret123

3=123456,4343

10=basic.m2m

1[email protected]

12=password

15=1

16=01020304050607080910111213141516

14=134

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 51 52

Comments to this Manuals

No comments

Bosch ITS-DX4020-G Specifications Page 20

Comments to this Manuals