Bosch ITS-DX4020-G Specifications Page 26

  • Download
  • Add to my manuals
  • Print
  • Page
    / 52
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 25
26 en | Configuration GPRS/GSM IP Communicator
F01U133268 | 03 | 2010.05 Installation and Operation Guide Bosch Security Systems, Inc.
Figure 4.6 ITS-DX4020-G USB Login Window
6. Enter the password to log on. The default password is 4020G (all uppercase).
The user interface allows three attempts to enter the password correctly. After three
failed attempts, you must reset the ITS-DX4020-G by removing the jumper plug from the
CONFIG MODE jumpers, and then repeat Steps 3 through 6.
7. Press [Enter] to continue. The USB main menu opens. Refer to Figure 4.7, Page 27.
NOTICE!
The ITS-DX4020-G USB login window shows the firmware version. The procedures in this
installation and operation guide require software version 1.3.15 or later. Refer to
Section 6 Firmware Upgrade, page 36 for firmware upgrade instructions.
Page view 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 51 52

Comments to this Manuals

No comments