Bosch 4410L Operations Instructions download pdf (Page 18)

Adjustments (continued)

Disconnect plug from power source

before performing any assembly,

adjustment or repair to avoid possible injury.

Slide Action Adjustment

1. Locate the 4 Set Screws (A, B, C, & D) on the Rail

Guide Housing. (Figure 1)

2. Loosen the Nut on Set Screw (A) with an

adjustable wrench.

3. Tighten or loosen Set Screw (A) with the 4mm end

of the bit on the multi-purpose tool until you

achieve minimal slide play while maintaining the

desired sliding force.

4. After adjusting Set Screw (A), hold Set Screw (A)

with a 4mm allen key and tighten the nut with an

adjustable wrench without moving the Set Screw.

(Figure 2)

5. Complete steps 2-4 with the remaining set screws

in order as shown in figure 1.

Figure 1. Set Screws

Figure 2. Adjust and Tighten Set Screw

18.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 115 116

No comments

Bosch 4410L Operations Instructions Page 18