Bosch CM10GD Use and Care Manual download pdf (Page 36)



*5.AM@.!6A2?BAJ&.D2.AB?2@

• A “miter cut” is a cross-cut made with the blade

perpendicular to the horizontal table. The blade is

not tilted and the bevel pointers are both on the 0°

lines.

• Miter cuts can be made at any angle across a

workpiece within this saw’s range, from 52° left to

60° right.

• The miter scale shows the angle of the blade

relative to the saw’s fence. The miter pointer is

attached to the turntable and indicates the saw’s

miter position before the cut is made.

• Ten positive detents are provided for fast and

accurate preset miter angles – locations are at

45°, 31.6°, 22.5°, 15° left and right, and center at

0°. The right side has an additional detent of 60°.

• The crown molding detents on the left and right

are at 31.6° for compound cutting 38° “spring

angle” crown molding lying flat on the table (see

Cutting Crown Molding on page 45).

• For precision settings at miter angles very close to

the miter detents, use the miter detent override to

prevent the detent from automatically engaging

the detent slot. See detent override instructions on

page 33.

• A miter cut can be made either as a chop cut or

slide cut, depending on the width of the workpiece.

• The kerf inserts should be adjusted to be as close

to the blade as possible to reduce splintering (see

kerf insert instructions on page 20).

%2.16;4A52!6A2?&0.92

The miter scale used on this saw includes several

scales of information to help the user accurately preset

this saw before making the cuts (see Figure 44).

&.D#=2?.A6<;@

!6A2?BA@

64B?2!6A2?&0.92;3<?:.A6<;

“31.6” detent position for cutting 38° “spring angle” crown molding flat on table

“35.3” position for cutting 45° “spring angle” crown molding flat on table

1 of 10

Detent Symbols

Pitch angles for roofs

Calibration information

MITER SCALE INFORMATION

BM 2610027879 07-13_BM 2610027879 07-13.qxp 7/8/13 9:52 AM Page 36

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 163 164

Comments to this Manuals

No comments

Bosch CM10GD Use and Care Manual Page 36

Comments to this Manuals

Related products and manuals for Mitre saws Bosch CM10GD