Bosch D9210C Specifications download pdf (Page 15)

Access Control Interface Module Installation | en 15

Bosch Security Systems, Inc. Installation and Operation Guide F.01U.215.244 | 05 | 2012.06

Figure 3.1 Wiring Diagram for Typical D9210C installation

3.2.3 Door Contact (Onboard) Point

ZN+, COM

Description. The interface module monitors the sensor loop for normal, shorted, or open

conditions. This loop is provided for a door contact. The maximum distance the door contact

may be remoted from the interface module is 500 feet. The door contact can be programmed

as a perimeter, interior, or 24 hour burglar alarm point.

NOTICE!

Do not install or replace an interface module while it is connected to live power circuits. The

interface module should be powered down until it is ready to be tested.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

No comments

Bosch D9210C Specifications Page 15