Bosch D6100IPv6 Specifications download pdf (Page 28)

11.5 V to 10.2 V Battery Low

Below 10.2 V Battery Bad Battery Missing

Table 9.1: Battery Voltage Display

Device Qty 12 V Battery Standby

Current

UPS AC Standby Current

D6600 (one D6640/ D6641/

D6645 Card)

1 800 mA 800 m

350 mA 350 mA

Additional D6640/ D6641/

D6645 Cards

210 mA x Qty (2

to 7)

35 mA x Qty (2

to 7)

Additional D6650/D6655

Cards

300 mA x Qty (1

to 8)

50 mA x Qty (1

to 8)

D6672 COM1 Adapter 10 mA (if

installed)

2 mA (if

installed)

Total Standby Current: Total UPS

Current:

Table 9.2: Calculating Standby Current for the D6600

The standby current required for the D6600 depends on the number of optional cards

installed in the receiver. Use the table above to calculate the D6600 standby current. The

standby current required by the D6100IPv6 is listed in the table below.

12 V Battery Standby

UPS AC Standby Current

330 mA 250 mA

Table 9.3: Standby Current for the D6100IPv6

Notice!

18 Ah batteries are required to meet 24-hour standby requirements.

Minimum Standby Battery

The table below shows the maximum standby current for common rechargeable battery

capacities at 4-hour, 8-hour, and 24-hour standby periods. If the standby current is larger than

the value listed, you must use the next larger capacity battery.

Rechargeable Battery

Capacity

Maximum Standby Current (mA)

4 hr 8 hr 24 hr

7 Ah 1400 700 230

8 Ah 1600 800 265

18 Ah 3600 1800 600

Includes 20% battery de-rating storage factor

9.4.1

28 en | Power

Conettix Communications Receiver/

Gateway

2012.11 | 08 | 4998122704 Installation and Operation Guide Bosch Security Systems, Inc.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 87 88

Comments to this Manuals

No comments

Bosch D6100IPv6 Specifications Page 28

Comments to this Manuals