Bosch D6100IPv6 Specifications download pdf (Page 78)

D6200 cannot

connect to the

D6600/

D6100IPv6.

D6200 serial

connection is

defective, missing, or

incorrect serial cable.

Ensure that the cable between the PC and the D6600/D6100IPv6 is

null-modem. Also ensure that the cable is not damaged. Inspect all

pins on the D6600/D6100IPv6, PC, and serial cable.

Ensure that the null-modem cable is connected to the correct COM

port of the PC (as per the D6200 COM setting; COM1 through COM8).

COM settings do not match. In the D6200, under the Settings Menu,

select COM SETTINGS. Confirm that all settings match the

configuration of the D6600 Host Programming Parameters (Menu Item

4.5 Parameters).

On the D6600, ensure that Menu Item 4.5.9 RS-232 Direct Access

Permission is set to 1.

If upgrading software, ensure that Menu Item 4.5.7 Software

Programming Enable (on the D6600/D6100IPv6) is set to 1.

Notice! If Software Programming Enable is set to zero (0),

communication between the D6200 and the D6600 is successful but

the upgrades fail.

If using COM4 through a direct connection, check that Menu Item 6.1.5

COM4 Network Adapter is set to 0.

If using COM1 through a direct connection, check that Menu Item 6.2.5

COM1 Network Adapter is set to 0.

Port conflicts with other applications on the host PC.

Reboot the PC and restart the D6200 with no other applications

running.

Defective CPU terminator card.

Defective CPU card.

Defective PC COM port.

78 en | Troubleshooting Guide

Conettix Communications Receiver/

Gateway

2012.11 | 08 | 4998122704 Installation and Operation Guide Bosch Security Systems, Inc.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 87 88

No comments

Bosch D6100IPv6 Specifications Page 78