Bosch DiBos Micro Installation Guide download pdf (Page 26)

26 en | Device Connections DiBos/DiBos Micro

F.01U.033.308 | V7 | 2009.09 Installation Guide Bosch Sicherheitssysteme GmbH

3.2.2 DiBos micro Rear View

1 On/Off switch 7 2x USB 2.0

(e.g. for mouse and keyboard with

USB connection)

2 Mains connection 100 / 240 VAC, 50 /

60 Hz (automatic switchover)

8 1x Ethernet (RJ45) - 2x USB 2.0

3 Mouse (green) - Keyboard (purple).

These connections should be used if

the mouse and keyboard are not

connected via USB.

9 Line in (blue)

Speaker out (green)

Microphone in (red), mono

4 Serial interface COM1 10 Grabber 2 (camera 7 - 12)

5 Parallel interface.

Note:

The HW dongle must be connected if

handling a device that has been

supplied with a HW dongle.

11 Grabber 1 (camera 1 - 6)

6 VGA monitor 12 I/O card with plug for connecting the

alarm inputs and relay outputs and

socket for video monitor A and video

monitor B

NOTICE!

Ferrites must be fitted to the following cables:

– Network cable (2 ferrites directly next to each other)

–Keyboard (1 ferrite)

The ferrites must to be fitted to the cable directly next to the connections.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 157 158

No comments

Bosch DiBos Micro Installation Guide Page 26