Bosch DiBos Micro Installation Guide download pdf (Page 34)

34 en | Quick Configuration DiBos/DiBos Micro

F.01U.033.308 | V7 | 2009.09 Installation Guide Bosch Sicherheitssysteme GmbH

5.3 Setting up the Network

System menu > Configuration wizard > Next

If integrated into a customer network, the following settings must be made:

1 Network card: Select the network card.

Limit bandwidth Limits data transmission bandwidth to a value that the

system does not exceed.

2 TCP/IP settings Specify here whether the network connection should use a

fixed IP address or whether the IP address should be

assigned automatically.

Obtain IP address

automatically

The IP address of this network connection is dynamically

assigned by a DHCP server.

Note:

The device must be connected to the network and the

available network must support this function.

3 Use following IP

address:

A fixed IP address will be assigned to the network

connection. In this case, the IP address and subnet mask

must subsequently be entered.

Note:

You can obtain these from your system administrator or

Internet service provider.

IP address: Enter the IP address.

Subnet mask: Enter the number of the subnet mask. The IP address and

subnet mask determine which network your computer will

use.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 157 158

No comments

Bosch DiBos Micro Installation Guide Page 34