Bosch B450 Specifications download pdf (Page 31)

Option Press

Select

Description

1. Modify

Diagnostic

Settings

1 The Diagnostic logging is intended for use only under Bosch direction. Diagnostic

settings determine which types of messages to display.

2. Re-print All

Console Message

2 The Re-print all option prints any diagnostic messages that have already occurred and

are stored in the B450’s buffer. This can print what just happened if an issue occurs.

3. Enable Live

Console

Messages

3 Enable live console messages provides real time output of diagnostic messages. This

allows the PC running TeraTerm to log what is occurring in the module and can log

for longer periods of time.

Table 5.4: Diagnostic Log sub-menu parameters

SMS and USB configuration parameters

Notice!

The table below shows all parameters available through SMS or USB configuration. Values in

bold are default settings.

ID Parameter Values Description

1 Current Password 4 to 10 characters (B450) Mandatory and case sensitive.

Notice!

Make sure you record and record your password.

2 New Password 4 to 10 characters New password, as desired. Case sensitive.

13 TCP/UDP Port

Number

1 to 65535 (7700) Sets the source port for the B450.

15 AES Encryption 0 = Disabled

1 = 128 bit, 2 = 192 bit, 3 = 256

bit

Security encryption on or off. The setting must

match the encryption settings in the receiver.

Notice!

This setting applies to SDI, and GV4 v1.0.x control

panels only.

16 AES Encryption Key 32, 48, or 64 digits max.

0-9, A-F, a-f allowed

01020304050607080910111213

14151617181920212223242526

272829303132

The AES Encryption Key must match the encryption

key in the receiver.

Notice!

This setting applies to SDI, and GV4 v1.0.x control

panels only.

19 Tamper (for GV4

v1.0.x control

panels)

0 = Disabled

1 = Enabled

When enabled, allows tamper and tamper restore

conditions to be reported to an SDI2 control panel.

Notice!

Only control panels with a SDI2 bus connection to

the B450 can report a tamper condition.

Conettix Plug-in Communicator

Interface

Configuration | en 31

Bosch Security Systems, Inc. Installation and Operation Guide 2013.09 | 02 | F.01U.282.875

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 47 48

Comments to this Manuals

No comments

Bosch B450 Specifications Page 31

Comments to this Manuals

Related products and manuals for Security access control systems Bosch B450