Bosch B450 Specifications download pdf (Page 7)

System overview

Refer to the graphic below for the complete B450 system configuration.

B450 system connections overview

Callout ᅳ Description

1 ᅳ Compatible Bosch control panel 6 ᅳ Cellular carrier network

2 ᅳ Panel data bus (SDI2 , SDI, or Option) 7 ᅳ Internet/LAN/WAN

3 ᅳ B450 8 ᅳ Remote Programming Workstation

4 ᅳ USB direct connection for B450

configuration (if required)

9 ᅳ Bosch Conettix IP receiver (D6600,

D6100i, or D6100IPv6)

5 ᅳ B44x Plug-in Cellular Communicator

(required and available separately)

Module overview

The B450 Conettix Plug-in Communicator Interface (wired to a compatible control panel) is a

four-wire powered SDI2, or SDI device that provides two-way communication over commercial

cellular networks using a plug-in communicator.

The B450 Conettix Plug-in Communicator Interface bus address switch determines the bus

address of the device. When required, configuration of the module is managed through the

control panel, a local USB connection, or using SMS.

3.1

Conettix Plug-in Communicator

Interface

System overview | en 7

Bosch Security Systems, Inc. Installation and Operation Guide 2013.09 | 02 | F.01U.282.875

1 2 3 4 5 6 7 8 9 10 11 12 ... 47 48

No comments

Bosch B450 Specifications Page 7