Bosch D9112B User's Guide download pdf (Page 15)

Non-Fire Trouble Events

When a trouble event such as an AC failure occurs, your

command center may be programmed to emit three warble tones,

then a pause (repeatedly).

If the system was armed the command center display shows the

number of non-fire trouble (A1 ## TROUBLES ) and then custom

text for each activated point.

Silencing Non-Fire Trouble Events

Entering a personal passcode with the proper authority level

silences a trouble and disarms the panel if it was armed. If you

wish to clear the scrolling trouble message from the display, enter

COMMAND 4. If you wish to review these cleared troubles, this

can be done by using COMMAND 40.

Viewing Non-Fire Trouble Events

After you enter your passcode, the text of the activated points

continues to automatically scroll through the display. Press NEXT

to scroll these displays manually if you wish. Events scroll from

oldest to newest. Use COMMAND 4 to clear these messages from

the display.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 55 56

No comments

Bosch D9112B User's Guide Page 15