Bosch D9112B User's Guide download pdf (Page 16)

Entry Delay Tone and Display

When you enter an armed system through a point programmed

for entry delay, the command center emits a repeating tweedle

tone and displays DISARM NOW to remind you to turn off your

security system.

If you fail to turn off the security system before the entry delay

time expires, it may sound the burglary tone and may also send

an alarm report to your security company.

Exit Delay Tone and Display

After you arm your system, the command center emits a repeating

beep tone, displays EXIT NOW, and counts down the exit delay

time.

Special System Trouble Display

SERVC AC FAIL and SERVC BATT LOW are examples of system

trouble displays. These displays appear on all keypads in the

system. All system trouble displays begin with SERVC. See

Standard Displays for a description of each system trouble display.

Entering your passcode or a COMMAND 4 will silence a system

trouble tone, but the SERVC display will not clear until the faulted

condition is corrected.

Cleared Events Are Not Lost

If you clear the alarms and troubles from the display, you can

still view all the events that occurred since the last time the system

was armed by using COMMAND 40 (View Event Memory).

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 55 56

No comments

Bosch D9112B User's Guide Page 16