Bosch DIP-7082-8HD Installation Manual download pdf (Page 69)

For the X8SIL/X8SIL-F/X8SIL-V motherboard, iSCSI is supported on LAN 1. This can be

enabled through the BIOS: Advanced => PCI/PnP Configuration => Onboard LAN1 Option ROM

Select.

Overview of the Nuvoton BMC controller

The Nuvoton WPCM150 is a combined Baseboard Management Controller and 2D/VGA-

compatible Graphics Core with PCI interface, Virtual Media and Keyboard, and a Keyboard/

Video/Mouse Redirection (KVMR) module.

The WPCM150 interfaces with the host system via a PCI interface to communicate with the

Graphics core. It supports USB 2.0 and 1.1 for remote keyboard/mouse/virtual media

emulation. It also provides an LPC interface to control Super I/O functions and connects to

the network via an external Ethernet PHY module or shared NCSI connections.

The Nuvoton BMC communicates with onboard components via six SMBus interfaces, fan

control, Platform Environment Control Interface (PECI) buses, and General Purpose I/O (T-

SGPIO) ports.

It also includes the following features:

–

One X-Bus parallel interface for expansion I/O connections

– Three ADC inputs, Analog and Digital Video outputs

– Two serial for boundary scan and debug

There are two different versions of the Nuvoton BMC chip that are used in this product series.

The Nuvoton WPCM150 (Manufacturer P/N WPCM150GA0BX5) which includes all of the

features above, is the chip installed in the X8SIL motherboard. Another version, the Nuvoton

WPCM450 (Manufacturer P/N WPCM450RA0BX) also has all the features as described above

plus IPMI 2.0 support. This particular chip is installed in the X8SIL-F and X8SIL-V models.

However, IPMI is supported only on the X8SIL-F motherboard.

8.8

DIVAR IP 7000 2U Appendices | en 69

Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC

1 2 ... 64 65 66 67 68 69 70 71 72

No comments

Bosch DIP-7082-8HD Installation Manual Page 69