Bosch PSB 24 VE-2 Operations Instructions download pdf (Page 10)

English - 2

Working safely with this ma-

chine is possible only when the

operating and safety information

are read completely and the in-

structions contained therein are

strictly followed. In addition, the

general safety notes in the enclosed booklet

must be observed.

■ Wear safety goggles.

■ For long hair, wear hair protection. Work only

with closely fitting clothes.

■ Before each use, check the machine and bat-

tery. If damage is detected, do not use the ma-

chine. Have repairs performed only by a qual-

ified technician. Never open the machine your-

self.

■ Before any work on the machine itself (e. g.

maintenance, tool change, etc.) as well as

when transporting and storing, always set

the rotational direction switch to the centre

position. Otherwise danger of injury is given

when unintentionally actuating the On/Off

switch.

■ Convince yourself before using that the battery

is securely seated in the machine.

■ Do not strain the machine so heavily that it

comes to a standstill.

■ PSB 18 VE-2/PSB 24 VE-2: Operate the ma-

chine only with the auxiliary handle 4.

When working with the machine, always hold it

firmly with both hands and provide for a secure

stance.

■ Use appropriate detectors to determine if

utility lines are hidden in the work area or

call the local utility company for assist-

ance.

Contact with electric lines can lead to fire and

electric shock. Damaging a gas line can lead

to explosion. Penetrating a water line causes

property damage.

■ Hold the power tool securely: When tightening

or releasing screws, high reaction torque can

briefly occur.

■ Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held more

secure than by hand.

■ Never allow children to use the machine.

■ Bosch is only able to ensure perfect operation

of the machine if the original accessories in-

tended for it are used.

Battery and Battery Charger

■ The enclosed operating instructions for the

battery charger must be read carefully!

■ Do not open the battery, and protect it from im-

pact. Store in a dry and frost-free place.

■ Allow a heated battery to cool before charging.

■ Protect the battery from heat and fire: Danger

of explosion!

■ Do not dispose of the battery in household

waste or discard into fire or water.

Battery Charging

A battery that is new or has not been used for a

longer period does not develop its full capacity

until after approximately 5 charging/discharging

cycles.

To remove the battery 5, press the unlocking but-

tons 10 and pull out the battery to the rear. Do not

exert any force.

The battery is equipped with an NTC temperature

control which allows charging only within a tem-

perature range of between 0 °C and 45 °C.

A long battery service life is achieved in this man-

ner.

A significantly reduced working period after

charging indicates that the batteries are used and

must be replaced.

■ Observe the notes on environmental protec-

tion.

■ Operate the machine only with the auxiliary

handle 4.

Screw the auxiliary handle 4 on the right or left of

the machine head depending on the working

method.

For Your Safety

Before Putting into Operation

Auxiliary Handle (see figure )

(PSB 18 VE-2/PSB 24 VE-2)

10 • 2 609 932 336 • TMS • 26.01.04

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 66 67

Comments to this Manuals

No comments

Bosch PSB 24 VE-2 Operations Instructions Page 10

Comments to this Manuals

Related products and manuals for Cordless combi drills Bosch PSB 24 VE-2