Bosch PSB 24 VE-2 Operations Instructions download pdf (Page 12)

English - 4

Setting the Torque

Carry out a practical test to determine with which

of the 5 settings of the torque setting ring 2 the

screws are driven flush into the material.

Low setting, e. g., small screws, soft

materials.

High setting, e. g., large screws, hard

materials.

With the correct setting, the clutch disengages as

soon as the screw is driven flush into the material

or the set torque is reached. Select a higher set-

ting when driving out screws, or set to the “Drill-

ing” symbol.

Drilling and Impact Drilling

Drilling

Set the torque setting ring 2 to the “Drill-

ing” symbol.

Impact Drilling

Set the torque setting ring 2 to the

“Hammer Drilling” symbol.

■ Before any work on the machine itself, re-

move the battery.

The locking screw 14 secures the drill chuck

against loosening from the drill spindle. Fully

open the drill chuck and completely unscrew the

locking screw 14 by turning in clockwise direction

(see figure ).

Loosening the Drill Chuck

(see figure )

Place the machine on a stable surface (e. g.

workbench). Hold the machine firmly and loosen

the chuck by turning to the left, as when unscrew-

ing a screw (

➊). Loosen a tight chuck by giving

the long end of the Allen key 13 a sharp blow.

Tightening the Drill Chuck

(see figure )

The drill chuck is mounted in reverse order (➋).

■ Use only screwdriver bits that fit properly in the

head of the screw.

■ When driving in larger and/or longer screws in

hard material, it is advisable to drill a pilot hole

first.

■ For drilling in metal, use only perfectly sharp-

ened HSS drills. The appropriate quality is

guaranteed by the Bosch accessories pro-

gram.

■ Before any work on the machine itself, re-

move the battery.

☞

For safe and proper working, always keep

the machine and the ventilation slots clean.

If the machine should fail despite the care taken

in manufacturing and testing procedures, repair

should be carried out by an after-sales service

centre for Bosch power tools.

In all correspondence and spare parts orders,

please always include the 10-digit order number

given on the nameplate of the machine.

Recycle raw materials instead of disposing as

waste

The machine, accessories and packaging should

be sorted for environmental-friendly recycling.

These instructions are printed on recycled paper

manufactured without chlorine.

The plastic components are labelled for catego-

rized recycling.

Replacing the Drill Chuck

Tips

Maintenance and Cleaning

Environmental Protection

12 • 2 609 932 336 • TMS • 26.01.04

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 66 67

Comments to this Manuals

No comments

Bosch PSB 24 VE-2 Operations Instructions Page 12

Comments to this Manuals

Related products and manuals for Cordless combi drills Bosch PSB 24 VE-2