Bosch GPO 14 CE Professional User Manual download pdf (Page 14)

English | 15

Bosch Power Tools 1 619 929 J63 | (9.9.11)

power failure or when the mains plug is pulled. This pre-

vents uncontrolled restarting.

f Secure the workpiece. A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.

Products sold in GB only: Your product is fitted with an

BS 1363/A approved electric plug with internal fuse (ASTA

approved to BS 1362).

If the plug is not suitable for your socket outlets, it should be

cut off and an appropriate plug fitted in its place by an author-

ised customer service agent. The replacement plug should

have the same fuse rating as the original plug.

The severed plug must be disposed of to avoid a possible

shock hazard and should never be inserted into a mains sock-

et elsewhere.

Products sold in AUS and NZ only: Use a residual current de-

vice (RCD) with a rated residual current of 30 mA or less.

Product Description and Specifica-

tions

Read all safety warnings and all instruc-

tions. Failure to follow the warnings and in-

structions may result in electric shock, fire

and/or serious injury.

While reading the operating instructions, unfold the graphics

page for the machine and leave it open.

Intended Use

The machine is intended for polishing and brushing metal and

coated surfaces as well as for polishing stone without the use

of water.

Product Features

The numbering of the product features refers to the illustra-

tion of the machine on the graphics page.

1 Fastening screw for bow handle

2 Bow handle (insulated gripping surface)

3 Spindle lock button

4 Thumbwheel for speed preselection

5 On/Off switch

6 Grinder spindle

7 Auxiliary handle (insulated gripping surface)*

8 Clamping mandrel*

9 Clamping flange*

10 Buffing disc*

11 Clamping nut*

12 Spacer discs*

13 Polishing plate*

14 Round nut*

15 Lamb’s wool bonnet for polishing plate*

16 Polishing sponge*

17 Lambskin polishing bonnet for polishing sponge*

18 Rubber sanding plate*

19 Sanding sheet*

20 Felt polishing disc*

21 Cup brush*

22 Handle (insulated gripping surface)

*Accessories shown or described are not part of the standard de-

livery scope of the product. A complete overview of accessories

can be found in our accessories program.

Technical Data

Noise/Vibration Information

Measured sound values determined according to EN 60745.

Typically the A-weighted noise levels of the product are:

Sound pressure level 91 dB(A); Sound power level

102 dB(A). Uncertainty K =3 dB.

Wear hearing protection!

Vibration total values a

(triax vector sum) and uncertainty K

determined according to EN 60745:

Polishing: a

=6.0m/s

, K=1.5 m/s

Disk sanding: a

=4.5m/s

, K=1.5 m/s

The vibration emission level given in this information sheet

has been measured in accordance with a standardised test

given in EN 60745 and may be used to compare one tool with

another. It may be used for a preliminary assessment of expo-

sure.

The declared vibration emission level represents the main ap-

plications of the tool. However if the tool is used for different

applications, with different accessories or poorly maintained,

the vibration emission may differ. This may significantly in-

crease the exposure level over the total working period.

An estimation of the level of exposure to vibration should also

take into account the times when the tool is switched off or

when it is running but not actually doing the job. This may sig-

nificantly reduce the exposure level over the total working pe-

riod.

Identify additional safety measures to protect the operator

from the effects of vibration such as: maintain the tool and the

accessories, keep hands warm, organise work patterns.

Polisher GPO 14 CE

Professional

Article number

3 601 C89 0..

Rated power input

W1400

Output power

W800

Rated speed

min

-1

3000

Speed control adjustment

min

-1

750 – 3000

Sanding pad diameter, max.

mm 180

Thread of grinder spindle

M 14

Max. spindle length

mm 21

Weight according to

EPTA-Procedure 01/2003 kg 2.5

Protection class

/II

The values given are valid for a nominal voltage [U] of 230 V. For differ-

ent voltages and models for specific countries, these values can vary.

Please observe the article number on the type plate of your machine.

The trade names of the individual machines may vary.

OBJ_BUCH-1284-002.book Page 15 Friday, September 9, 2011 8:58 AM

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 185 186

Comments to this Manuals

No comments

Bosch GPO 14 CE Professional User Manual Page 14

Comments to this Manuals

Related products and manuals for Tools Bosch GPO 14 CE Professional