Bosch DiBos Micro Installation Guide download pdf (Page 104)

104 en | Default Configuration DiBos/DiBos Micro

F.01U.033.308 | V7 | 2009.09 Installation Guide Bosch Sicherheitssysteme GmbH

Selecting LDAP server user group

Authorization levels menu > Select user group... button

In networked DiBos systems, the use of LDAP (LDAP = Lightweight Directory Access Protocol)

allows central information, such as user groups, passwords etc., to be called up from a server

to be used in the DiBos system.

The advantage of this is as follows:

– Users available in the DiBos network only need to be configured once on the LDAP

server, rather than on every DiBos.

– A user's authorization level can easily be changed by modifying the group association of

the user. Group association is only changed on the LDAP server.

– It is only on the LDAP server that new users are added and previous users deleted.

– Local users are also available. They can continue to be created on each system.

Before you can make the settings below, the individual groups and their members have to be

put on the LDAP server. These groups will then be assigned to the authorization levels in

DiBos. The configuration of the LDAP server is normally undertaken by the IT administrator,

not the DiBos administrator.

You will require the assistance of your IT administrator to make the following entries.

NOTICE!

All paths should be specified as accurately as possible. This makes it quicker to search the

LDAP server. The length of the search depends on the size of the database and can take

several minutes.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 157 158

No comments

Bosch DiBos Micro Installation Guide Page 104