Bosch DiBos Micro Installation Guide download pdf (Page 87)

DiBos/DiBos Micro Default Configuration | en 87

Bosch Sicherheitssysteme GmbH Installation Guide F.01U.033.308 | V7 | 2009.09

5 Switch on input Click the arrow. The list of available data fields will be

displayed. The list contains all data fields that are

displayed under Data structure.

Select the name of the data field and, in the text field

underneath, enter the value that triggers an image

recording in the data stream of the POS server.

Where there are several values, these must be

separated by semi-colons.

6 Switch off input Click the arrow. The list of available data fields will be

displayed.

Select the name of the data field and, in the text field

underneath, enter the value that ends an image

recording in the data stream of the POS server.

Where there are several values, these must be

separated by semi-colons.

7 Data field with terminal

number information:

Click the arrow. The list of available data fields will be

displayed.

Select the name of the data field which describes the

terminal number (e.g. cashpoint number).

8 Type Click the down arrow in the column and select

whether an input is to be activated or not.

Input should be used to trigger image recording.

Input should not be used to trigger image recording.

9 Name Place the cursor in the column and enter the name of

the input.

10 Terminal number Enter the terminal number to which the POS input is

allocated on DiBos.

11 Save The entries are saved.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 157 158

No comments

Bosch DiBos Micro Installation Guide Page 87