Bosch DS7400XiV4-EXP User Manual download pdf (Page 30)

DS7400XiV4-EXP | User Guide | 10.0 Testing Your System EN | 30

Bosch Security Systems | 6/05 | 4998154961B

10.5 Event History Readback

The History Buffer stores the last 400 events in memory. The text keypad can display all of these events. The

LED keypad only displays the zones (1 to 16) that alarmed since the last Event History Readback. If you perform

this test from a Master keypad, the keypad must be in Single Partition Mode. The RF3341 keypad cannot display

history events.

Table 29: Event History Readback

Type of Test Command Sequence What Happens What To Do

Event History

Readback

[PIN][#][8][9]

• The last event to take place is displayed. *

• The zone LEDs flash for any zones that alarmed

since the last Event History Readback. **

Note: To read the System Error Displays, follow the

instructions in Section 9.0 Error Displays.

• Scroll through the events

using the [9], [6], and [#]

keys. *

• Exit from Event History

using [PIN][#].

* Text keypad only ** LED keypad only

Scrolling through the History Events (Text Keypad Only)

Press [#] to scroll back through the history line by line.

Press [9] to scroll in reverse chronological order by event.

Press [6] to scroll back through the events (toward the most recent) by event.

Each event consists of two or three lines or display screens. The first line/screen is the event title and user. The

second line/screen is the date of the event or the change being made. If there is a third line/screen, it will be the

date of the change.

To exit the Event History Mode, press the [*] key or wait 20 seconds and the keypad exits automatically.

When performing Event History Readback from a Master keypad, each area displays its own history.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 39 40

No comments

Bosch DS7400XiV4-EXP User Manual Page 30