Bosch CM10GD Use and Care Manual download pdf (Page 16)



@@2:/9F

'< .C<61 =<@@6/92 6;7B?F

16@0<;;20A =9B4 3?<: =<D2?

@<B?02 /23<?2 =2?3<?:6;4 .;F .@@2:/9F

.17B@A:2;A@<??2=.6?@

AA.056;4.).0BB:92.;2?

The elbow has an exit port which will accept a

standard 35mm diameter vacuum fitting or a 1-1/4"

tube diameter. The 35mm diameter fitting is the

standard size used on the Vacuum Cleaners. For

larger vacuum tube sizes, use an adaptor.

AA.056;4A<).0BB: – Insert the vacuum fitting or

tube into the elbow’s exit port as far as it will go.

Check to see that the vacuum hose is free from the

mechanism and cutting path before plugging saw into

power source.

64B?2AA.056;4).0BB:92.;2?

%2=<@6A6<;6;4<?%2:<C6;4A52%B//2?

23920A<?

The rubber deflector extends the range of dust and

debris collection and should be left on the tool for

maximum dust pickup efficiency. When slide cutting

extra-tall materials (more than 2-3/16" high), the

rubber deflector will contact and flex over these

materials. It will also contact and flex when the saw is

pulled back before the cut. It will return to its original

shape after the cut.

%2=<@6A6<;6;423920A<? – If the operator wants to

avoid the contact of the rubber deflector with the

material, the deflector can be temporarily folded up

and over the back of the dust chute. If the operator

permanently wants no contact of the deflector with

the material being cut, the deflector may be removed.

%2:<C6;4 23920A<? – Pull one of the deflector’s

tabs to the front and then sideways until it comes off

one of the dust chute’s side hooks (see Figure 9).

Unhook the opposite side. Then unhook the deflector

from the rear post of the chute by pulling and

stretching until it is free. NOTE: Removing the

deflector lowers dust collection capability.

AA.056;4 23920A<? – Start by stretching and

hooking the deflector over the rear post, followed by

hooking over each side hook (see Figure 10).

64B?2

AA.056;4%B//2?23920A<?<;%2.?$<@A

64B?2

AA.056;4%B//2?23920A<?<;&612<<8@

*%""

Vacuum

Hoses

35 mm

Diameter

1-1/4 inch

Diameter

Elbow

Exit

Port

Dust Chute

Side Hook

Rear

Post

Rear of

Dust Chute

Rubber Deflector

Side Hook

Rear

Post

@@2:/96;4B@A<9920A6<;&F@A2:

BM 2610027879 07-13_BM 2610027879 07-13.qxp 7/8/13 9:52 AM Page 16

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 163 164

Comments to this Manuals

No comments

Bosch CM10GD Use and Care Manual Page 16

Comments to this Manuals

Related products and manuals for Mitre saws Bosch CM10GD