Bosch DS7400XiV4-EXP User Manual download pdf (Page 15)

DS7400XiV4-EXP | User Guide | 6.0 Day to Day Operations EN | 15

Bosch Security Systems | 6/05 | 4998154961B

6.2.4 Automatic Arming

You can program each area to arm automatically once per day. You cannot program automatic arming from an

RF (wireless) keypad. Programming automatic arming in Master Keypad mode affects all areas you have access to.

If you program automatic arming in single area mode or from a single area keypad, it affects only the area you are

working in.

Do this procedure at a text keypad because no visual clues are provided from an LED keypad.

Table 12: Automatic Arming

Setting the Automatic Arming Time Notes

[Master PIN][#][0] You can only set the Automatic Arming Time in Master Programming Mode.

[1] To enter Automatic Arming Setup programming.

Enter the area number.

Press [#] to exit.

• If programming from a Master Keypad that is not in Single Partition Mode, you are

prompted to enter the area to program.

• You are allowed to program only the areas to which you are assigned.

• If programming from a standard keypad or from a Master Keypad in Single

Partition Mode, skip this step.

Enter a time for each day in

24-hour clock format

• Programming starts with Sunday. The keypad displays “Sunday –nn : nn”

• Enter the time in 24-hour clock format and press the [#] key. If you make a

mistake, press the [#] key twice to move back to your last entry.

• Time examples: 12 midnight = 2400# 12 noon = 1200#

12:01 am = 0001# 12:01 pm = 1201#

1:00 am = 0100# 1:00 pm = 1300#

Disabled = 0000#

6.2.5 Delaying Automatic Arming

When automatic arming is set, a pre-arming period begins 15 minutes before the system arms automatically to

inform occupants that the system is about to arm. The keypad sounders, and any outputs programmed to follow

the keypad sounders, pulse five times every minute. During the last five minutes before arming, these sounders are

on steady. Once per minute the keypad (text keypad only) displays “Arm in nn min./PIN OFF - extend.”

To delay automatic arming during the pre-arming period, use the appropriate command sequence from the table.

To extend the automatic arming time at any time, use the delayed arming feature.

An RF3341 keypad gives no indication of the pre-arming period and cannot be used to delay automatic

arming.

Table 13: Delaying Automatic Arming

Equipment Command Sequence What Happens What To Do

Text Keypad LED

Keypad

[PIN][Off] The arming time is extended to 30 minutes from

the time you entered the command sequence.

A new pre-arming period begins 15 minutes

prior to the new automatic arming time.

Exit before the new

automatic arming time.

RF3341,

RF3332/RF3322E,

RF3334/RF3334E

Not applicable

Note: The keypad volume setting also applies to the Auto Arm tone.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

Comments to this Manuals

No comments

Bosch DS7400XiV4-EXP User Manual Page 15

Comments to this Manuals

Related products and manuals for Security access control systems Bosch DS7400XiV4-EXP