Bosch DANESMOOR UTILITY 32-50 Instruction Manual download pdf (Page 26)

CAUTION: ISOLATE THE OIL & WATER

MAINS SUPPLY BEFORE STARTING ANY

WORK AND OBSERVE ALL RELEVANT

SAFETY PRECAUTIONS.

OIL BURNER:

1 Check the nozzle (E) settings are correct

for the relevant burner as shown opposite.

 Ensure nozzle (E) is aligned centrally within

the breakplate (G).

 Inspect for any visible defects.

IMPORTANT: The electrode assembly must

be positioned at 3 o’clock as shown in the

diagram.

IMPORTANT: Whenever replacing the

combustion head, ensure that the photocell

is lined up with the sight hole.

OIL PUMP:

Connecting the oil pump for a single pipe

system:

The pump is factory set for single pipe

operation with the flexible oil hose fitted.

Check connections before use.

Converting the oil pump for a double pipe

system:

1 Check the inlet hose connection.

a) DANFOSS BFP 11 L3:

 Remove pump front cover (A) ensuring a

suitable receptacle is used to catch any oil

residue.

 Remove changeover screw (B).

 Remove horseshoe washer (C).

 Refit changeover screw (B).

 Refit front cover (A).

 Remove oil pump return plug (2).

 Connect flexible oil return hose.

b) DANFOSS BFP 52E L3:

 Remove plug (A) and screw in grub

screw (B).

 Refit plug (A).

 Remove oil pump return plug (D).

 Connect the flexible oil return hose to the

OIL BURNER & PUMP

BENTONE STERLING BURNERS

OIL BURNER & PUMP

BENTONE STERLING BURNERS

INSTALLATION & SERVICING INSTRUCTIONS FOR WORCESTER GREENSTAR UTILITY 32/50 & 50/708 716

109 711B 07.2010

INSTALLATION

8 716 109 711 b 07.10 14/7/10 09:59 Page 26

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 51 52

Comments to this Manuals

No comments

Bosch DANESMOOR UTILITY 32-50 Instruction Manual Page 26

Comments to this Manuals

Related products and manuals for Water heaters & boilers Bosch DANESMOOR UTILITY 32-50