Bosch Solution 64 Specifications download pdf (Page 103)

Bosch Security Systems | 11/05 | BLCC110I

13-1



S e c t i o n 1 3

Specications

Panel Description Solution 64 (Part Number CC110)

Voltage Input 16-22 VAC

Current

Requirements

22 VA min 3 wire plug pack adapter or

transformer

Power Outputs

Continuous

Power

1 Amp (Primary supply source only)

Secondary

Source

4 Amp (Total with both primary and

secondary source combined)

Stand-by Battery 12 VDC, 7AH sealed rechargeable

battery

Min Operating

Voltage

10.2 VDC

Discharge Cycle

AC O Keypads indicate trouble condition, AC

Fail report sent (if programmed)

13.8 VDC Charging level

11.5 VDC Low battery trouble at keypads, low

battery report sent (if programmed)

10.0 VDC Panel shuts down as voltage fails below

10.2 VDC

Recharge Cycle

AC On Panel restarts, battery charging begins.

AC trouble clears from keypads,

AC restore report sent (if programmed).

13.0 VDC Battery trouble clears from keypads,

Battery restore report sent.

(if programmed).

13.8 VDC Battery pulse charged.

LAN BUS 12 VDC, 305 m of 14/0.20 0.8mm2

(22 AWG) cable.

Telephone

Connections

RJ-12 Socket and 4-way terminal

Temperature 0˚ to 55˚C

Relative

Humidity

5 to 85% at 30˚C non-condensing.

Compatible

Keypads

Graphic Keypads

Graphic Keypads with Prox

Compatible

Accessories

CM100 Voice Command Module

CM105 16/32 Zone Expander

CM106 8/16 Piggy Back Zone Expander

CM110 4 Way Relay Output Module

CM120 1 Amp LAN Power Supply

CM130 Serial Output Module

CM140 GSM Modem Module

CM150 TCP/IP Interface Module

SW500 SolutionLink (RAS) Software

Enclosure

Dimensions

375mm (W), 257mm (H), 90mm (D)

Part Number: MW100

PWA Dimensions 235mm (W), 40mm (H), 85mm (D)

Warranty 3 years from date of manufacture

(return to base)

You should receive the following parts with the panel.

Panel Assembly

Includes

Metal Enclosure

Panel PWA

User Manual

Installer Reference Guide

Resistor Pack

Resistor Pack

Includes

1 x Red Battery Lead

1 x Black Battery Lead

1 x 2-Way Shunt With Handle

2 x Phillips Pan Head Zinc Plate Screw

1 x Telephone Cable RJ12 6P/4C

10 x 3K3 – 0.25W +/- 1% Resistors

10 x 6K8 – 0.25W +/- 1% Resistors

1 x 3-Way AC Terminal Block

1 x Panel Tamper Switch

1 x Tamper Switch Bracket

Available

Separately

BLCC110I Installation Manual

SolutionLink (RAS) Software

1 2 ... 98 99 100 101 102 103 104 105 106 107 108

Comments to this Manuals

No comments