Bosch Solution 64 Specifications download pdf (Page 8)

2-2

Bosch Security Systems | 11/05 | BLCC110I

Solution 64

Installer Guide

Section 2 - Installing the Hardware

Panel Address Select

The Solution 64 pcb has three DIP switches (called Panel Node

Select) that must be set. In a multi-panel system, each control

panel (Node) must to be set to a unique address.

Panel NODE Select DIP Switch Address Settings

Panel to Address S1 S2 S3

Panel 1 Off Off Off

Panel 2 On Off Off

Panel 3 Off On Off

Panel 4 On On Off

Panel 5 Off Off On

Panel 6 On Off On

Panel 7 Off On On

Panel 8 On On On

Table 3 Panel Node Address Select

Note

The node switch should be left at Panel 1 position for Solution

64. OFF-OFF-OFF

The Graphic Keypad has 20, silicone rubber push button keys.

The buttons allow you to input instructions and navigate the

menu screens as required. Some buttons have a secondary

function which is activated by holding them down for two

seconds.

Each button’s function is described below

Keypad Button Functions

Key

Description

The numeric keys allow you to enter

numbers when required

Use the [MENU] and the numeric keys

to enter commands. The [MENU] key

is also used to go back one level when

navigating through menus or to exit a

programming location without saving

changes.

The [ON] key allows you to turn an area

or output on. To turn all areas on at the

same time when the system has been

partitioned, press and hold the [ON]

key for two seconds.

The [PART] key allows you to turn an

area Part On. This key can also be used

to bypass a zone or multiple zones

when you press and hold for two

seconds.

The [OFF] key allows you to turn an area

or output o. To turn all areas o at the

same time when the system has been

partitioned, press and hold the [OFF]

key for two seconds.

The [OK] key allows you to save any

changes and exit the command.

Key

Description

The [MAIL] key allows you to read

stored mail. This key can also be used

to initiate a dialler test when you press

and hold for two seconds.

The [] key allows you to move the

cursor to the left when programming

text or telephone numbers.

The [] key allows you to move the

cursor to the right when programming

text or telephone numbers.

The [↑] key allows you to navigate

through menus or to toggle characters

when programming text or telephone

numbers.

The [] key allows you to navigate

through menus or to toggle characters

when programming text or telephone

numbers. Pressing the [] key when the

area is disarmed will display any current

trouble conditions.

for 2 sec

Pressing the 1 and 3 keys together and

holding them down for 2 seconds will

cause a Panic alarm to be triggered. If

programmed the sirens will sound and

the monitoring station will be notied.

for 2 sec

Pressing the 4 and 6 keys together and

holding them down for 2 seconds will

cause a Fire alarm to be triggered. If

programmed the sirens will sound and

the monitoring station will be notied.

for 2 sec

Pressing the 7 and 9 keys together and

holding them down for 2 seconds will

cause a Medical alarm to be triggered. If

programmed the sirens will sound and

the monitoring station will be notied.

Keypad Installation and Setup

The Solution 64 control panel can have a maximum of 8

keypads connected via the LAN terminals. Each keypad must

be set to a unique address before they will operate and you will

also need to set the keypad home address in MENU 6-1-3.

Set each keypad address using the table below as a guide.

Note

Only 1 Keypad can be assigned to each address.All Keypads are

supplied from the factory set to address 1. OFF-OFF-OFF.

Keypad Address Selection

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 107 108

Comments to this Manuals

No comments

Bosch Solution 64 Specifications Page 8

Comments to this Manuals

Related products and manuals for Power tools Bosch Solution 64