Bosch Solution 64 Specifications download pdf (Page 42)

Solution 64

Installer Guide

Input Programming

7-2

Bosch Security Systems | 11/05 | BLCC110I

The keypad will display the following zone array information

for Zones 97 to 112.

9990000000000111 1

7890123456789012 0

---------------- 0

Press  OK or MENU

The keypad will display the following zone array information

for Zones 113 to 128.

1111111222222222 1

3456789012345678 0

---------------- 0

Press  OK or MENU

When nished press [OK] or [MENU] to exit.

Inputs > Commands >

Bypass Zones







MENU 3-0-2

This menu allows users with the appropriate access level to

manually bypass zones eectively removing them from the

area for the current arming cycle. All zone types including

24hour zones can be bypassed.Bypassed zones will be reset

when the area is turned o or disarmed.

Enter [MENU] + [3] + [0] + [2]. A list of zones that can be

bypassed will display on the keypad. A tick displayed on the

right side of the zone name indicates that the zone is already

bypassed.

Zn001 Zone 1 Name 

Zn002 Zone 2 Name

Zn003 Zone 3 Name

Press  OK or MENU

Using the up and down arrow keys highlight the zone that you

want to bypass, then press [OK]. Alternatively, you can enter

the zone number that you want to bypass, then press [OK]. If

the zone is bypassed, the keypad will prompt:

Zone 1 Name Zn001 is

bypassed. To un-bypass

Press OFF.

Press OK or MENU

If the zone is not bypassed, the keypad will prompt:

Zone 1 Name Zn001 is

un-bypassed. To bypass,

Press ON.

Press OK or MENU

Press [ON] or [OFF] to toggle the zone(s) bypass state then

Press [OK] to save and exit or press [MENU] to exit without

saving.

Repeat steps 1 to 4 to bypass or un-bypass additional zones.

Inputs > Commands >

Set Chime Zones





MENU 3-0-3

This menu allows you to program zones to be monitored when

chime mode is activated. Chime mode is ideal for monitoring

a front door in a shop, a pool gate or other entrance points.

To sound the keypad buzzer when a chime zone is opened

(faulted) See MENU 6-1-5 — Beeper Options. To activate

Chime mode enter PIN + [MENU], select the Commands option

and use the arrow keys to scroll to the Chime On/O menu.

Chime mode only works when the area is disarmed.

Enter [MENU] + [3] + [0] + [3] and use the up and down arrows

to highlight the area from the list then press [OK].

Use the up and down arrow keys to highlight the zone(s) you

want to program as Chime Zones then press [OK].

Alternatively, you can enter the zone number directly then

press [OK]. A tick mark displayed on the right side of the zone

name indicates that the zone is already set for chime.

Zn001 Zone 1 Name 

Zn002 Zone 2 Name

Zn003 Zone 3 Name

Press  OK or MENU

One of the following messages will be displayed depending on

the current zone programming.

Zone 1 Name Zn001

Zone Chime is OFF

To turn ON, Press ON

To Go Back Press OK

Zone 1 Name Zn001

Zone Chime is ON

To turn OFF, Press OFF

To Go Back Press OK

Press [ON] or [OFF] to toggle the zone to be monitored when

Chime Mode is turned on then press [OK] to save and exit or

[MENU] to exit without saving.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 107 108

Comments to this Manuals

No comments

Bosch Solution 64 Specifications Page 42

Comments to this Manuals

Related products and manuals for Power tools Bosch Solution 64