Bosch Solution 64 Specifications download pdf (Page 47)

Solution 64

Installer Guide

Input Programming

Bosch Security Systems | 11/05 | BLCC110I

7-7

Inputs > Zone Properties >

Report Route



MENU 3-1-6

0 = Report Events To Log Only 1

1 = Report Events To Destination 1 + Log

2 = Report Events To Destination 2 + Log

3 = Report Events To Destination 1 & Destination 2 + Log

4 = Report Events To Destination 2 If Destination 1 Fails +Log

This menu sets the Zone Report Route or Report Destination

for each individual zone in the system. All events such as

alarms and troubles for each zone will be reported according

to this menu setting. Each zone can only be assigned to one

report route from the list above.

Press [MENU] + [3] + [1] + [6] and use the up and down arrows

to highlight the Zone in the list then press [OK]. Alternatively,

you can enter the zone number directly and press [OK]. The

keypad will display the current Zone Report Route.

Report Route Zn001

01 - Dest 1 + Log

Press 0-9 OK or MENU

Use the up and down arrows to select the Report Route that

you want to assign the zone to.

Press [OK] to save and exit or press [MENU] to exit without

saving.

Note

At factory default all Zones are set to report to Destination

1 and the System Log. See the Zone Default Table for more

information on Zone default settings.

Inputs > Zone Properties >

Report Options



MENU 3-1-7

1 Lockout Dialer Y

2 Report Alarm Y

3 Report Trouble Y

4 Report Bypass Y

5 Reserved N

6 Reserved N

7 Report Restores Y

8 Delay Report N

The above options are programmable per zone.

Press [MENU] + [3] + [1] + [7] and use the up and down arrows

to highlight the Zone in the list then press [OK]. Alternatively,

you can enter the zone number directly and press [OK]. The

keypad will display the Report Options for the currently

selected zone.

Use the up and down arrow keys to highlight the option then

press the [ON] key to enable or the [OFF] key to disable.

 Lockout Dialler

 Report Alarm

 Report Troubles

Press  OK ON OFF MENU

Repeat Step 2 until all options are programmed as required,

then press [OK] to save and exit or press [MENU] to exit

without saving.

Lockout Dialler

Setting this option will enable Dialler Lockout functionality for

the respective zone(s). All zones in the system can be individually

programmed for Dialler Lockout.

When enabled the zone will be allowed to transmit alarm reports

each time it is triggered provided that the Swinger Dialler count has

not been reached. If the zone is triggered and the Swinger Dialler

count has been reached then the zone will become locked out and no

further reports will be sent for that zone. Dialler lockout will be reset

on the next arming cycle.

See MENU 5-4-5 — Swinger Dialler to set the number of times a zone

is allowed to trigger before being locked out.

Report Alarm

Setting this option will enable the system to Report Alarm events

for the respective zone. All zones in the system can be individually

programmed to report alarms.

Report Trouble

Setting this option will enable the system to Report Trouble events

for the respective zone. A Trouble report will be sent if the zone is

left unsealled at the end of exit time. All zones in the system can be

individually programmed to report trouble events.

Report Bypass

Setting this option will enable the system to Report Zone Bypass

events for the respective zone. A Bypass report will be sent at the end

of exit time for zones which have been manually bypassed. All zones

in the system can be individually programmed to report Zone Bypass

events.

Report Restores

Setting this option allows the system to send Restore reports for

zones that have already sent a previous alarm or trouble report on the

same arming cycle.

Burglary Zone alarms and troubles restore when the zone

reseals or the area is disarmed.

24hr Zone alarms and troubles restore when the zone reseals.

Bypassed Zone restore when the area is disarmed.

Delay Report

Setting this option will cause the system to delay alarm reports for

the selected zone. This option can be enabled to allow a user to enter

their PIN and disable the report in case they have caused a false alarm.

If a PIN is not entered within the delay time, the system will trigger the

sirens and send the report as normal.

See MENU 5-4-6 — Burg Report Delay and MENU 5-4-7 — Fire Report

Delay to set the delay time.

If a PIN code is entered after the delay time has expired, and the sirens

are still sounding, the system will send the Alarm report followed by a

Cancel report.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 107 108

Comments to this Manuals

No comments

Bosch Solution 64 Specifications Page 47

Comments to this Manuals

Related products and manuals for Power tools Bosch Solution 64