Bosch Solution 64 Specifications download pdf (Page 72)

Solution 64

Installer Guide

Comms Programming

9-10

Bosch Security Systems | 11/05 | BLCC110I

Comms > Dialler Reporting >

TX Format Dest 2



MENU 5-4-1

0 = Disable 1

1 = Contact ID 7 = Domestic

2 = SIA 8 = Voice 13 = Reserved

3 = Serial STU 9 = Panel 1 (Node 1) 14 = Reserved

4 = GSM 10 = Panel 2 (Node 2) 15 = Reserved

5 = WEB MAIL 11 = Panel 3 (Node 3)

6 = SMS 12 = Panel 4 (Node 4)

This menu allows you to program the transmission format

or language the panel will use to send event reports to

Destination 2.

Press [MENU] + [5] + [4] + [1]. The keypad will display the

current Transmission Format for Destination 2.

TX Format Dest 2 N001

01-Contact ID

Press 0-9 OK to SAVE

Use the up and down arrow keys to select the Transmission

Format required then Press [OK] to save and exit or press

[MENU] to exit without saving.

Note

Transmission Formats 9 -12 are not applicable on the Solution

64 control panel and should not be programmed. Other

formats may require additional hardware or add on modules to

function.

Comms > Dialler Reporting

Test Route



MENU 5-4-2

0 = Report Events To Log Only 1

1 = Report Events To Destination 1 + Log

2 = Report Events To Destination 2 + Log

3 = Report Events To Destination 1 & Destination 2 + Log

4 = Report Events To Destination 2 If Destination 1 Fails + Log

This menu programs which destination will be used to send

both manual and automatic test reports.

(*** System Wide Parameter ***)

Press [MENU] + [5] + [4] + [2]. The keypad will display the

current Test Route.

Test Route

01-Dest 1 + Log

Press 0-9 OK to SAVE

Use the up and down arrow keys to select the Test Route

required then Press [OK] to save and exit or press [MENU] to

exit without saving.

Comms > Dialler Reporting

Status Route



MENU 5-4-3

0 = Report Events To Log Only 1

1 = Report Events To Destination 1 + Log

2 = Report Events To Destination 2 + Log

3 = Report Events To Destination 1 & Destination 2 + Log

4 = Report Events To Destination 2 If Destination 1 Fails + Log

This menu sets the report destination that will be used to send

all system event reports.

(*** System Wide Parameter ***)

Press [MENU] + [5] + [4] + [3]. The keypad will display the

current Status Report route.

Status Route

01-Dest 1 + Log

Press 0-9 OK to SAVE

Use the up and down arrow keys to select the Test Route

required then Press [OK] to save and exit or press [MENU] to

exit without saving.

Comms > Dialler Reporting

Emergency Route



MENU 5-4-4

0 = Report Events To Log Only 1

1 = Report Events To Destination 1 + Log

2 = Report Events To Destination 2 + Log

3 = Report Events To Destination 1 & Destination 2 + Log

4 = Report Events To Destination 2 If Destination 1 Fails + Log

This menu programs the destination that all Keypad

emergency alarms are reported.

(*** System Wide Parameter ***)

Press [MENU] + [5] + [4] + [4]. The keypad will display the

current Emergency Route.

Emergency Route

01-Dest 1 + Log

Press 0-9 OK to SAVE

Use the up and down arrow keys to select the Keypad

Emergency route required then Press [OK] to save and exit or

press [MENU] to exit without saving.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 107 108

Comments to this Manuals

No comments

Bosch Solution 64 Specifications Page 72

Comments to this Manuals

Related products and manuals for Power tools Bosch Solution 64