Bosch D9112B Installation Manual download pdf (Page 20)

D9112B | Program Entry Guide | 1.0 Panel Wide Parameter EN | 20

Bosch Security Systems | 2/04 | 74-06145-000-D

Bat Fail/Res Rpt

Determines if battery (DC) power supervision

reports are sent.

The battery must be discharged below 12.1 VDC for

16 sec. before the D9112 responds to a low battery

(see the D9112 Operation and Installation Guide for

discharge schedule).

Default: Yes

Selection: Yes or No

Battery Failure

and

Restoral

reports are sent to the central station. They are routed to the telephone

number programmed for Power/Phone events.

Yes

Modem Reports:

BFSK Reports:

Missing or shorted

Discharged below 12.1 VDC

Missing, shorted, low battery

BATTERY MISSING

BATTERY LOW

TROUBLE ZONE 9

Battery Failure and Restoral reports are NOT sent to the central station.

Note:

When a battery problem occurs, the trouble buzzer sounds at the command centers unless it is disabled by

AC/Battery

Buzz

(see AC/Battery Buzz).

1.4 Printer Parameters

Up to three D9131 Printer Interface Modules can be

connected to the D9112’s SDI bus. Each printer is

identified by an address of 17, 18, or 19. Options

are available for

Routing

reports and area

assignments.

Printer Address

Default: 17

Selection: 17, 18, or 19

The printer address you are programming.

P## Scope

Press the [SPACE] bar to scroll through the selections. Press [ENT] when the correct selection appears in the

display.

Default: No Printer

Selection: No Printer, Panel Wide, Account, and Area

No Printer Printer disabled

Panel Wide Printer prints all designated events that occur panel-wide. A panel-wide printer crosses account

boundaries.

Account Printer prints all designated events that occur in the area where the printer is assigned and all other

areas that are assigned to the same account. A single account printer displays all the information in

the account but cannot cross boundaries.

Area Printer prints all designated events that occur in the assigned area.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 95 96

Comments to this Manuals

No comments

Bosch D9112B Installation Manual Page 20

Comments to this Manuals

Related products and manuals for Security access control systems Bosch D9112B