Bosch D9112B Installation Manual Page 66
- Page / 96
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
D9112B | Program Entry Guide | 6.0 Passcode Worksheet EN | 66
Bosch Security Systems | 2/04 | 74-06145-000-D
6.0 Passcode Worksheet
The next 100 groups of entries determine the user
passcodes and the authority level each user has in
each area. Within these groups are entries to
determine the supervision reporting for the user
passcode.
Each user is identified by a two digit number. These
numbers are called User ID Codes, and they range
from 00 through 99. Both of these digits are logged
in the D9112 memory with user events.
In reporting systems using
Modem Format
, both
digits of the User ID Code are transmitted to the
central station with associated reports. If the central
station automation computer system can only accept
ZONEX and COMEX style user IDs, see
Point/User Flag
in the Phone section of Panel Wide
Parameters.
In BFSK, only one number is transmitted. This
number represents a group of ten users as shown in
Table 29. To report the proper User ID number with
Opening
and
Closing
reports see
A# Area O/C
and
A# Acct O/C
.
Passcodes are generally used to arm and disarm a
security system. In the D9112, a passcode can also
be used to access a number of command center
functions. Command center functions are enabled
for each authority level in the User Interface module
of the program.
Table 29: BFSK User ID Report Format
User
00 to 09
User
10 to 19
User
20 to 29
User
30 to 39
User
40 to 49
User
50 to 59
User
60 to 69
User
70 to 79
User
80 to 89
User
90 to 99
BFSK
Report
0
BFSK
Report
1
BFSK
Report
2
BFSK
Report
3
BFSK
Report
4
BFSK
Report
5
BFSK
Report
6
BFSK
Report
7
BFSK
Report
8
BFSK
Report
9
Duress
Create a secondary passcode. This secondary passcode has all the features of the user’s primary passcode. In
addition, it can send DURESS alarm if enabled in Authority Lvl Assign
Send Duress
.
To use a secondary passcode, the user increases the value of the last digit of their primary passcode when entering
it at the command center. The
Duress
entry determines if users add one or two to the last digit of the passcode.
Note:
All users use the same formula for the duress code. You only need to program Duress one time.
Default: Blank
Selection: Blank, 1, or 2
1 Create a unique secondary (duress) passcode for each user where the last digit of the primary
Passcode
is increased by “1.”
For example:
• If the primary passcode is 6123, 6124 is the secondary passcode.
• If the last digit of the primary pass code is 9, the last digit of the secondary passcode is 0.
2 Create a unique secondary (duress) passcode for each user where the last digit of the primary
passcode is increased by “2.”
For example:
• If the primary passcode is 6123, 6125 is the secondary passcode.
• If the last digit of the primary pass code is 8, the last digit of the secondary passcode is 0.
• If the last digit of the primary pass code is 9, the last digit of the secondary passcode is 1.
Blank Do not create secondary passcodes (disable duress feature).
- Control Panel 1
- About this Guide 2
- Other Lettering Conventions 2
- Used in this Manual 2
- Table of Contents 3
- Table of Tables 7
- 1.0 Panel Wide Parameter 8
- Point/User Flag 9
- A# Acct O/C 9
- A# Area O/C 9
- P### BFSK/Relay 9
- Modem Format 10
- Default: 11
- 1.2 Phone Routing 12
- 1.3 Power Supervision 19
- 1.4 Printer Parameters 20
- PRT Non Alrm 21
- SDI Fail 21
- Diagnostic 21
- Expanded Test 21
- 1.5 RAM Parameters 22
- Log % Full 24
- RAM Call 24
- Bad Call to RAM 24
- 2.0 Area Wide Parameters 25
- 2.2 Bell Parameters 27
- 2.3 Opening and Closing 29
- 2.4 O/C Windows 35
- Xept Holiday 39
- W## Xept Holiday 39
- 2.5 Command Center 42
- CF# Text 44
- CF# Key Stroke 44
- Program Record Sheet 44
- 3.0 User Interface 45
- 3.3 Cmd Center Function 46
- 3.4 Authority Lvl Assign 46
- Point Type 51
- Perimeter O/C 51
- Perimeter 51
- Closing Options 60
- 4.0 Command Menu 62
- 5.0 User Access Windows 64
- Windows 65
- 6.0 Passcode Worksheet 66
- Usr Code Tamper 67
- 7.0 Point Index 69
- Response 70
- Point Response 70
- P## Entry Delay 70
- 72
- A# Burg Time 74
- Fire Point 74
- 1. Program point 75
- 2. Choose a 75
- 3. Enable and/or disable 75
- 8.0 Point Assignments 79
- 8.2 Command 9 80
- 8.3 Command 7 81
- 9.0 Relay Parameters 82
- 9.1 Area Wide Relays 83
- 9.2 Panel Wide Relays 85
- 10.0 Skeds 86
- S## Area 1 87
- Bypassable 88
- Unbypass Point 88
- Unbypass All 88
- S## Defer Test 90
- S## Hourly Report 90
- S## Defer Status 90
- S## Cmd Center 91
- S## Custom Func 91
- 11.0 Holiday Indexes 94
- 11.2 View Holidays 95
- Bosch Security Systems 96
- 130 Perinton Parkway 96
- Fairport, NY 14450-9199 96
Related products and manuals for Security access control systems Bosch D9112B
(5 pages)
(8 pages)
(2 pages)
(12 pages)
(122 pages)© 2020, manymanuals.com. All rights reserved. | 1.358 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals