Bosch NEI-Series User Manual download pdf (Page 23)

Dinion IP Infrared Imager Installation | en 23

Bosch Security Systems, Inc. User Manual F.01U.263.416 | 3.1 | 2012.09

4.2 Mount the Junction Box

Figure 4.1 Interior of the Junction Box

1. Decide which holes in the junction box to use to insert the

power wires, video, and control data wires: the holes in

the bottom of the box, the holes in the back of the box, or

the holes in the side of the box.

2. If necessary, before mounting, move the two (2) seal plugs

to the holes that you are not using. For example, if you are

using the holes in the back of the box, move the plugs to

cover the holes in the bottom of the box.

3. Locate studs in the wall and mark the outside edges of the

studs.

4. Using the wall mount bracket as a template, align the

mounting holes with the center of the studs.

5. Mark the points on the wall in the center of the holes

where the mounting bolts will be positioned.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 123 124

No comments

Bosch NEI-Series User Manual Page 23