Bosch NEI-Series User Manual download pdf (Page 61)

Dinion IP Infrared Imager Configuration via IP, Advanced Mode | en 61

Bosch Security Systems, Inc. User Manual F.01U.263.416 | 3.1 | 2012.09

B-gain

Offsets factory white point alignment (reducing blue introduces

more yellow) (-50 to 0 to +50).

It is only necessary to change the white point offset for special

scene conditions.

Saturation

Adjusts the color saturation (-15 to 0 to +5) so as to make the

reproduction of colors on your monitor as realistic as possible; -

15 gives a monochrome image.

9.3.8 Encoder Profile

For the video signal encoding, you can select a code algorithm

and you can change the presets for the profiles.

You can adapt the video data transmission to the operating

environment (for example network structure, bandwidth, data

load). To this end, the camera simultaneously generates two

data streams (Dual Streaming), which compression settings

you can select individually, for example one setting for

transmissions to the Internet and one for LAN connections.

Pre-programmed profiles are available, each giving priority to

different perspectives.

You can change individual parameter values of a profile and you

can also change the name. You can switch between profiles by

clicking the appropriate tabs.

Profile Target

bit rate

Maximum

bit rate

Encoding

interval

High Resolution 1 2000 kbps 4000 kbps 30.00 ips

High Resolution 2 1500 kbps 3000 kbps 30.00 ips

Low Bandwidth 700 kbps 1500 kbps 30.00 ips

DSL 400 kbps 500 kbps 30.00 ips

ISDN (2B) 80 kbps 100 kbps 30.00 ips

ISDN (1B) 40 kbps 50 kbps 30.00 ips

Modem 20 kbps 22 kbps 15.00 ips

GSM 7 kbps 8 kbps 7.50 ips

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 123 124

No comments

Bosch NEI-Series User Manual Page 61