Bosch NEI-Series User Manual download pdf (Page 79)

Dinion IP Infrared Imager Configuration via IP, Advanced Mode | en 79

Bosch Security Systems, Inc. User Manual F.01U.263.416 | 3.1 | 2012.09

Metadata is always created for a video content analysis, unless

this was explicitly excluded. Depending on the analysis type

selected and the relevant configuration, additional information

overlays the video image in the preview window next to the

parameter settings. With the MOTION+ analysis type, for

example, the sensor fields in which motion is recorded will be

marked with rectangles.

Motion detector (MOTION+ only)

For the detector to function, the following conditions must be

met:

– Analysis type must be activated.

– At least one sensor field must be activated.

– The individual parameters must be configured to suit the

operating environment and the desired responses.

–The Sensitivity must be set to a value greater than zero.

NOTICE!

Additional analysis algorithms with comprehensive functions

such as IVMD and IVA are available from Bosch Security

Systems, inc.

If you select one of these algorithms, you can set the

corresponding parameters here directly. You can find

information on this in the relevant documents on the product

CD supplied.

NOTICE!

On the LIVEPAGE Functions page, you can also enable

additional information overlays for the LIVEPAGE (see

Section 9.2.2 LIVEPAGE Functions, page 54).

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 123 124

No comments

Bosch NEI-Series User Manual Page 79