Bosch NEI-Series User Manual download pdf (Page 96)

96 en | Configuration via IP, Advanced Mode Dinion IP Infrared Imager

F.01U.263.416 | 3.1 | 2012.09 User Manual Bosch Security Systems, Inc.

Configuration

You can save configuration data for the camera on a computer

and then load saved configuration data from a computer to the

unit.

Upload

1. Enter the full path of the file to upload or click Browse to

locate and select the required file.

2. Ensure that the file to be loaded comes from the same unit

type as the unit that you want to configure.

3. Click Upload to begin transferring the file to the unit. The

progress bar allows you to monitor the transfer.

Once the upload is complete, the new configuration is

activated. The time remaining is shown by the message going to

reset Reconnecting in ... seconds. The unit reboots

automatically once the upload has successfully completed.

Download

1. Click the Download button. A dialog box opens.

2. Follow the on-screen instructions to save the current

settings.

SSL certificate

To be able to work with an SSL-encrypted data connection,

both ends of a connection must hold the relevant certificates.

You can upload the SSL certificate, comprising one or multiple

files, onto the camera.

CAUTION!

Before launching the firmware upload, ensure that you have

selected the correct upload file. Uploading the wrong files can

result in the unit no longer being addressable, in which case

you must replace the unit.

You should never interrupt the installation of firmware. An

interruption can lead to the flash-EPROM being incorrectly

programmed. This in turn can result in the unit no longer being

addressable, in which case it will have to be replaced. Even

changing to another page or closing the browser window leads

to an interruption.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 123 124

No comments

Bosch NEI-Series User Manual Page 96