Bosch NEI-Series User Manual download pdf (Page 32)

32 en | Manual Camera Settings Dinion IP Infrared Imager

F.01U.263.416 | 3.1 | 2012.09 User Manual Bosch Security Systems, Inc.

Figure 6.3 Focus and Zoom screws on the inside of the access panel on

the rear of the camera housing

6.1.3 Making Pan Adjustments

1. Using the 4 mm hex key, loosen the bolts at the base of the

“u bracket” to make the necessary pan adjustments.

2. When loosened, adjust the camera to the desired pan

angle.

3. Tighten the bolt to secure in place.

6.1.4 Making Tilt Adjustments

1. Using the 2.5 mm hex key, unscrew the round caps (CCW)

where the bracket attaches to the camera housing to

expose the bolts for tilt adjustment.

2. Using the 4 mm hex key, loosen the bolts.

3. Make the necessary tilt adjustments.

4. Tighten the bolts to secure the camera in place.

5. Replace the round caps when you finish the adjustments.

Figure 6.4 Example orientation: Camera rotated 90 degrees left, pointing

up 44 degrees. From left: front view, side view, back view

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 123 124

No comments

Bosch NEI-Series User Manual Page 32