Bosch NEI-Series User Manual download pdf (Page 95)

Dinion IP Infrared Imager Configuration via IP, Advanced Mode | en 95

Bosch Security Systems, Inc. User Manual F.01U.263.416 | 3.1 | 2012.09

Posting interval

Enter the interval in seconds at which the images will be sent to

an FTP server. Enter zero if you do not want any images to be

sent.

FTP server IP address

Enter the IP address of the FTP server on which you want to

save the JPEG images.

FTP server login

Enter your login name for the FTP server.

FTP server password

Enter the password that gives you access to the FTP server.

Path on FTP server

Enter the exact path on which you want to post the images on

the FTP server.

Max. bit rate

You can limit the bit rate (in kbps) for FTP posting. The default

is 10000.

9.7.5 Encryption

A special license, with which you will receive a corresponding

activation key, is required to encrypt user data. You can enter

the activation key to release the function on the Licenses page

(see Section 9.8.2 Licenses, page 97).

9.8 Advanced Mode: Service

9.8.1 Maintenance

Firmware

The camera’s functions and parameters can be updated with

firmware. To do this, transfer the current firmware package to

the unit via the selected network. It will then be installed there

automatically. In this way, the camera can be serviced and

updated remotely without a technician having to change the

installation on-site.

You obtain the current firmware from your customer service or

from the download area at www.boschsecurity.com.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 123 124

No comments

Bosch NEI-Series User Manual Page 95