Bosch NEI-Series User Manual download pdf (Page 78)

78 en | Configuration via IP, Advanced Mode Dinion IP Infrared Imager

F.01U.263.416 | 3.1 | 2012.09 User Manual Bosch Security Systems, Inc.

4. Click the Load... button to load a saved profile. A new

window opens in which you can select the profile file and

specify where to save the file.

VCA configuration

Select one of the profiles here to activate it or edit it.

You can rename the profile.

1. To rename the file, click the icon to the right of the list field

and enter the new profile name in the field.

2. Click the icon again. The new profile name is saved.

Alarm status

The alarm status is displayed here for information purposes.

This means that you can check the effects of your settings

immediately.

Aggregation time(s)

You can set an aggregation time of between 0 and 20 seconds if

necessary. The aggregation time always starts when an alarm

event occurs. It extends the alarm event by the value set. This

prevents alarm events that occur in quick succession from

triggering several alarms and successive events in a rapid

sequence. No further alarm is triggered during the aggregation

time. The post-alarm time set for alarm recordings only starts

once the aggregation time has expired (see

Section 9.4.2 Recording Profiles, page 69).

Analysis type

Select the required analysis algorithm. By default, only

MOTION+ is available – this offers a motion detector and

essential recognition of tampering.

CAUTION!

Do not use any special characters, for example &, in the name.

Special characters are not supported by the system's internal

recording management and may therefore result in the Player or

Archive Player being unable to play back the recording.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 123 124

No comments

Bosch NEI-Series User Manual Page 78