Bosch Solution 64 Specifications download pdf (Page 81)

Solution 64

Installer Guide

Device Programming

Bosch Security Systems | 11/05 | BLCC110I

10-5

Report Keypad Panic

Setting this option allows the panel to send a Panic report (event 44)

to the base station when a Keypad Panic Emergency Alarm has been

triggered via the keypad.

Devices > Keypads >

Reserved



MENU 6-1-7

Devices > Keypads >

Lockout Time



MENU 6-1-8

0 6 0

SECONDS

This menu programs how long a keypad will be quarantined if

the PIN retry count value is exceeded.

See MENU 1-5-1 — PIN Retry Count. The PIN retry counter is

reset when any area is armed or disarmed using a valid PIN.

(*** System Wide Parameter ***)

Press [MENU] + [6] + [1] + [8]. The keypad will display the

current keypad lockout time.

Lockout Time

060 Seconds

Press 0-9 OK to SAVE

Use the numeric keys to program the number of seconds the

keypad will be locked out for. Valid entries are 0 - 255, 0 = No

Lockout.

Press [OK] to save and exit, else press [MENU] to exit without

saving.

RF Receiver Options

Devices > RF Devices >

Receiver Options



MENU 6-2-0

1 Display RF Receiver Troubles Y

2 Alarm On RF Receiver Tamper Y

3 Report RF Receiver Tamper Y

4 Alarm On RF Receiver Jam Detect N

5 Report RF Receiver Jam Detect N

6 Alarm On RF Receiver Comms Fail Y

7 Report RF Receiver Comms Fail Y

8 Reserved N

This menu option allows you to congure the various RF

receiver functions. Only one RF reciever can be tted per panel.

Press [MENU] + [6] + [2] + [0]. The keypad will display the

current receiver options.

 Display RF Rcvr Trouble

 Alarm RF Rcvr Tamper

 Report RF Rcvr Tamper

Press  OK ON OFF MENU

Use the up and down arrow keys to highlight the option then

press the [ON] key to enable or the [OFF] key to disable.

Repeat Step 2 until all options are programmed as required,

then press [OK] to save and exit or press [MENU] to exit

without saving.

Display RF Receiver Trouble

Setting this option allows the panel to display a trouble condition on

the keypad when an RF receiver fail condition occurs.

Alarm On RF Receiver Tamper

Setting this option allows the panel to trigger an alarm when the RF

receiver tamper circuit is tripped.

Report Faulted RF Receiver Tamper

Setting this option allows the panel to send an RF Receiver Tamper

report to the the base station when the RF receiver tamper circuit

is tripped. A restore report will be sent when the tamper circuit is

resealled.

Alarm On RF Receiver Jam Detect

Setting this option allows the panel to sound an alarm when the RF

Receiver detects a jamming signal. This signal may not be provided by

all compatible RF Receivers.

Report Receiver Jam Detect

Setting this option allows the panel to send an RF Receiver Jam report

to the base station when the RF Receiver detects a jamming signal. A

restore report will be sent as soon as the jamming signal stops.

Alarm On RF Receiver Comms Fail

Setting this option allows the panel to sound an alarm when it is

unable to communicate with the RF Receiver.

Report RF Receiver Comms Fail

Setting this option allows the panel to send an RF Receiver

Comms Fail report to the base station when the panel is unable to

communicate with the RF Receiver. A restore report will be sent as

soon as communication is restored between the panel and the RF

receiver.

Device > RF Devices >

SuperSolution Time



MENU 6-2-1

0 2 4

HOURS

This menu sets the global RF superSolution time for all RF

devices connected to the system.

RF transmitters (sensor devices) will send a supervisory test

signal approximately once every hour. The RF receiver expects

to receive this supervisory signal from every transmitting

device within the superSolution time period.

The panel will send a Missing report to the base station for any

RF device that fails to report within the superSolution time.

Press [MENU] + [6] + [2] + [1]. The keypad will display the

current RF superSolution time.

SuperSolution Time

024 Hours

Press 0-9 OK to SAVE

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 107 108

Comments to this Manuals

No comments

Bosch Solution 64 Specifications Page 81

Comments to this Manuals

Related products and manuals for Power tools Bosch Solution 64