Bosch DS7447 User's Guide download pdf (Page 11)

– 11 –

Standard Operations (continued)

Day to Day Operations (continued)

Perimeter Instant Arming

Used when someone is still on the premises, only the exterior (perimeter) zones are to be armed, and an exit delay is in effect, but no entry

delay is in effect so an alarm will occur upon entry. The green Status LED must be lit and, if using a DS7447/DS7447E keypad, “Ready to

Arm” must be displayed. If the green LED is not on or the keypad displays “Not Ready,” see Force Arming or Zone Bypass in Optional

Procedures for other ways to arm the system.

Note: In commercial burglar alarm applications for UL Listed systems, a ring-back indication and

bell test should be heard after arming (closing). If not heard, call for service.

Equipment

Used

Command

Sequence

What Will

Happen

What

To Do

DS7447/

DS7447E

DS7445/

DS7445i

[PIN] + [No Entry] +

[Perimeter Only]

• The red Armed LED will flash.

• “Perimeter Inst.” Will be displayed. *

• “Exit Now” will be displayed during the exit-delay

period. *

• The green Status LED will turn on steady.

• A single beep will sound.

• The red Armed LED will turn on steady when the exit-

delay period ends.

• The yellow Perimeter LED will turn on steady. **

• Only exterior protection zones will arm.

RF3341

[PIN] + [#] + [2]

• The LED will flash indicating a signal has been sent

to your security system.

• Only exterior protection zones will arm.

• Move freely around the

interior.

• Opening any exterior

door or window will

trigger an alarm.

RF3332

RF3334

RF3502

Not Applicable

* DS7447/DS7447E only

** DS7445/DS7445i only

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 59 60

Comments to this Manuals

No comments

Bosch DS7447 User's Guide Page 11

Comments to this Manuals

Related products and manuals for Security access control systems Bosch DS7447