Bosch DS7447 User's Guide download pdf (Page 17)

– 17 –

Optional Operations (continued)

Day to Day Operations (continued)

Force Arming

When one or more zones are faulted (if, for example, a window or

door is open), the system may be Force Armed (if programmed) by

bypassing the faulted zones. A DS7447/DS7447E display will read

“Not Ready” and the zone LED(s) on a DS7445/DS7445i for the

faulted zone(s) will be on when Force Arming is required to arm the

system. Although an RF3341 keypad will not indicate a faulted state

on the system, Force Arming can be entered from an RF3341 keypad.

Using a Master keypad in Single Partition Mode also allows Force

Arming of Partitions.

Force Arming during an AC power failure: Regular arming of the

control panel is not permitted during an AC power failure. Having to

Force Arm serves as a warning that the control panel is operating

under backup battery.

Bypassing or Force Arming removes some of your

building’s protection because it excludes the faulted

zones from arming. Therefore, an intrusion may not be

detected or the detection may be delayed. Always

attempt to correct any zone problems (close doors and

windows, etc.) before using these features. If the

problem can not be corrected, contact your installing

company.

Note: See Zone Bypass for an alternate method of arming the

system when faults exist. Force arming is not available in

UL Listed systems.

Equipment

Used

Command

Sequence

What Will

Happen

What

To Do

DS7447/

DS7447E

DS7445/

DS7445i

Enter any Arming

Command Sequence.

Enter [Bypass] during

five-second beep.

•

The red Armed LED will flash during the exit-delay period.

•

All zones normally armed by the Arming Command Sequence

will arm except for faulted zones.

RF3341 Any Arming

Command Sequence

+ [9]

•

The LED will flash indicating a signal has been sent to your

security system.

•

All zones normally armed by the Arming Command Sequence

will arm except for faulted zones.

Exit during exit-delay

period if leaving.

RF3332

RF3334

RF3502

Not Applicable

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 59 60

Comments to this Manuals

No comments

Bosch DS7447 User's Guide Page 17

Comments to this Manuals

Related products and manuals for Security access control systems Bosch DS7447