Bosch DS7447 User's Guide download pdf (Page 33)

– 33 –

Personal Identification Numbers

General Information

When programming Personal Identification Numbers, it is helpful to

know the following terms:

• PIN: Personal Identification Number. This is the 4 or 6 digit code

users must enter at the keypad to gain access to the system. A PIN

may be assigned to each User Number 001 through 200.

• User Number: This is the number that identifies each person using

the system. There are 200 possible User Numbers available for

use (001 through 200).

• Authority Level: This number determines which functions each

user will be able to perform.

Your system has the capability to assign up to 200 PINs, each four or

six digits long. Each User Number can have only one PIN assigned

to it. Attempting to assign the same PIN to multiple User Numbers

will result in the three-beep error tone, and the entry will not be made.

User Number 001 is designated as a Master code. It can be used to

add, delete, or change other PINs. It will always have access to all

partitions regardless of how it is programmed.

User Number 001 is shipped from the factory with the PIN of 1 2 3 4.

This PIN should be changed to one of your personal preference

and must be programmed as a Master code.

PINs should never be programmed with common sequences such as

1 2 3 4, 1 1 1 1, or 2 4 6 8 because they are easily violated.

Removing a PIN

To disable (remove) a PIN, enter:

• a [Master code] followed by [#] [0]

• [0]

• User number of the PIN to be cancelled, followed by [#]

User Number 001 can not be disabled in this manner.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 59 60

No comments

Bosch DS7447 User's Guide Page 33