Bosch DS7447 User's Guide download pdf (Page 47)

– 47 –

Arming from the Master Keypad

The Master Keypad (continued)

Type of Arming Desired Command Sequence

Arming

All

the Partitions to which

You Have Access

[PIN] + any Arming Command Sequence

This will arm all the partitions to which you have access even if they are already armed.

Arming

Only Some

the Partitions to which

You Have Access

1. [PIN] + [#] + [#]. This puts you into Single Partition Mode.

2. The first partition to which you have access is displayed:

“Ready to Arm. Cafeteria.”

3. Enter the Arming Command Sequence you want for this partition.

4. [#] + [#] opens the next partition to which you have access.

5. The next partition to which you have access is displayed:

“Ready to Arm. Office.”

6. Enter the Arming Command Sequence you want for this partition.

7. After arming any or all partitions to which you have access, you may exit Single Partition Mode by

holding the [*] key for at least two seconds. The system will also drop out of Single Partition Mode

after 40 seconds without a keypad entry.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 59 60

No comments

Bosch DS7447 User's Guide Page 47