Bosch DS7447 User's Guide download pdf (Page 14)

– 14 –

Note: In commercial burglar alarm applications for UL Listed systems, a ring-back indication and

bell test should be heard after arming (closing). If not heard, call for service.

Standard Operations (continued)

Day to Day Operations (continued)

Maximum Security Arming

Used when no one is still on the premises, all zones are to be armed, and an exit delay is in effect, but no entry delay is in effect so an alarm

will occur upon entry. The green Status LED must be lit and, if using a DS7447/DS7447E keypad, “Ready to Arm” must be displayed. If the

green LED is not on or the keypad displays “Not Ready,” see Force Arming or Zone Bypass in Optional Procedures for other ways to arm the

system.

Equipment

Used

Command

Sequence

What Will

Happen

What

To Do

DS7447/

DS7447E

DS7445/

DS7445i

[PIN] + [No Entry] +

[On]

•

The red Armed LED will flash.

•

“Armed Instant” will be displayed. *

•

“Exit Now” will be displayed during the exit-delay period.

•

A single beep will sound.

•

The red Armed LED will turn on steady when the exit-delay period

ends.

•

All zones will arm.

RF3341 [PIN] + [#] + [5]

•

The LED will flash indicating a signal has been sent to your

security system.

•

All zones will arm.

•

Exit during the

exit-delay period.

•

Violating any

zone after the

exit-delay period

ends will trigger

an instant alarm.

RF3332

RF3334

RF3502

Not Applicable

* DS7447/DS7447E only

** DS7445/DS7445i only

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 59 60

Comments to this Manuals

No comments

Bosch DS7447 User's Guide Page 14

Comments to this Manuals

Related products and manuals for Security access control systems Bosch DS7447