Bosch DS7447 User's Guide download pdf (Page 21)

– 21 –

Optional Operations (continued)

Day to Day Operations (continued)

Automatic Disarming

Each partition can be programmed to automatically disarm once per day. Automatic Disarming is not programmable from an RF (wireless)

keypad. If Automatic Disarming is used in Master Keypad mode, it will affect all partitions you have access to. If used in single partition mode,

or from a single partition keypad, it will affect only the partition you are working in.

It is recommended that this procedure be performed at a DS7447/DS7447E keypad. No visual clues will be given from a

DS7445/DS7445i keypad.

Setting the Automatic Disarming Time Notes

[Master PIN] + [#] + [0] Setting the Automatic Disarming Time can only be performed in the Master

Programming Mode.

[4] To enter the Automatic Disarming Setup programming

Enter the partition number.

Press [#] to exit.

•

If programming is done from a Master Keypad that is

not

in Single Partition

Mode, you will be prompted to enter the Partition to be programmed.

•

You will only be allowed to program the Partitions to which you are

assigned.

•

If programming from a standard keypad or from a Master Keypad in Single

Partition Mode, this step will be skipped.

Enter a time for each day in 24-hour clock format.

•

The display will start with Sunday. It will read, “Sunday –nn : nn”

•

Enter the time in 24-hour clock format, then press the # key. If you make a

mistake, press the # key twice to move back to your last entry.

•

Time Examples: 12 midnight = 2400# 12 noon = 1200#

12:01 am = 0001# 12:01 pm = 1201#

1:00 am = 0100# 1:00 pm = 1300#

Disabled = 0000#

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 59 60

No comments

Bosch DS7447 User's Guide Page 21