Bosch 6000 Installation Manual Page 124

  • Download
  • Add to my manuals
  • Print
  • Page
    / 170
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 123
Solution-144
Installation Manual Comms Programming
9-26
Bosch Security Systems 10/12 BLCC600BI
Comms > Comms Test >
Test Route
MENU 5-9-4
00 - Log Events Only 0 1
01 - Dest 1 + Log
02 - Dest 2 + Log
03 - Dest 1 & 2 + Log
04 - Dest 2 If 1 Fails
This menu programs which destination will be used to
send both manual and automatic test reports.
(*** System Wide Parameter ***)
1) Press [MENU] + [5] + [9] + [4]. The keypad will
display the current Test Route.
Test Route
01 - Dest 1 + Log
Press  0-9 OK to SAVE
2) Use the up and down arrow keys to select the Test
Route required then Press [OK] to save and exit or
press [MENU] to exit without saving.
Comms > Comms Test >
Dial Number Test
MENU 5-9-5
This option provides a quick and easy way for the Installer
to test the communication path for the panel while they
are onsite without the need to trigger test reports and then
verify them with the base station. Once the telco wiring
has been completed, enter your mobile phone or another
test number into this location and press [OK]. The panel
will then seize the phone line and dial the programmed
number.
1) Press [MENU] + [5] + [9] + [5], then select either
PSTN or GMS communication to test the dialler if
an optional GSM module has been fitted.
GSM
PSTN
Exit
Press  OK or MENU
2) Use the numeric keys to enter the the test number.
You can change a single digit in the number by
scrolling the cursor left or right. For special
characters (eg. , = pause * or # etc), use the up and
down arrow keys. To clear all text from the cursor
position to the right, press the [OFF] key.
Enter Digits To Dial
Press  OK to SAVE
3) Press [OK] when finished to start the test.
The panel will make only one attempt to call this
number per activation. To perform multiple tests
repeat the sequence. There is no need to answer the
test call.
»»END OF SECTION««
Page view 123
1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 169 170

Comments to this Manuals

No comments